All About From News

Fantastic Plumbing Tips That Can Really Help

Mar 15

 

Plumbing needs to be done right! It can create more trouble and expense if it is not done properly! Not everyone is a plumber. If you are not up to the job, hire it out! If you can do-it-yourself, that is great! You will need the right tools and know how. Read this article for some handy tips and tricks!

Plumbing Giant 

If a pipe ever freezes, you need to make sure to shut off the water. This will keep the pipe from bursting and causing you major damage to your home. Make sure to shut the water off at the main valve, and then open the faucet that is closest to the frozen pipe so it can drain while it is thawing out.

When starting a plumbing project that is due to loud noises in your pipes empty the pipes first. This can be an easy fix to an other wise wasted huge job. Just close the main water line and open the facets throughout the house. After the water has stopped flowing turn the water on from the main source and check to see if the noise is eliminated.

To avoid wasting water and having a potentially high water bill, check your home for leaky faucets periodically. Fix any leaks that you find right away. You may be able to do the repair yourself, but if not, you may have to seek the services of a plumber to make the repairs.

Odor removers such as bleach toilets are not good for your plumbing system. These may deodorize, but they can seriously damage the rubber pieces in the toilet, causing poor functionality or even complete breakdown of the fixture.

Frequently inspect the floors around toilets for softness; this can tell you whether or not the floors are damaged. Straddle the toilet, so you can rock from one leg to another to determine whether there's weakness in the floor. This will save you a lot of trouble and money if you find the issue before something horrible happens.

Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

One of the things that you can do to maximize the security of your home is to seal all of the cracks in your outdoor faucets. Even a tiny crack can intensify as the season progresses and lead to serious problems down the road. Reduce drips and leaks for optimal protection.

Make sure that your tool box is ready for any project you are preparing to do. The last thing you want is to be knee deep in a job only to find that you are missing the one tool you need to finish. Be sure to have various sizes of pipe wrenches that can be used to complete any job.

Frozen pipes can cause some very expensive plumbing repair jobs. This problem is easily avoided. First, you need to check your outside pipe to make sure it has the proper insulation. Once the temperature starts to drop, disconnect your hoses after you have drained them out, and make sure the outside faucet is turned off. Doing so can prevent some nasty repair bills a professional plumber would charge you.

When you wash your hands, be sure that you have not left any soap on the faucet handles. What people do not know is that leaving soap on these fixtures can cause fixtures to corrode. Just take two seconds after you are done washing your hands to remove excess soap from the handles.

Hopefully, you have found the tips and tricks above to be quite handy! Whether you hire out the job or do-it-yourself, take the necessary time to do it right. It can create more trouble and expense in the future, if it is not done properly!

Plumbing Giant